发布于 2015-08-27 16:39:19 | 209 次阅读 | 评论: 0 | 来源: 网络整理
You can define parameters in the service container which can then be used directly or as part of service definitions. This can help to separate out values that you will want to change more regularly.
Working with container parameters is straightforward using the container’s accessor methods for parameters. You can check if a parameter has been defined in the container with:
$container->hasParameter('mailer.transport');
You can retrieve a parameter set in the container with:
$container->getParameter('mailer.transport');
and set a parameter in the container with:
$container->setParameter('mailer.transport', 'sendmail');
警告
The used . notation is just a
Symfony convention to make parameters
easier to read. Parameters are just flat key-value elements, they can’t be
organized into a nested array
注解
You can only set a parameter before the container is compiled. To learn more about compiling the container see Compiling the Container.
You can also use the parameters section of a config file to set parameters:
parameters:
mailer.transport: sendmail
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services http://symfony.com/schema/dic/services/services-1.0.xsd">
<parameters>
<parameter key="mailer.transport">sendmail</parameter>
</parameters>
</container>
$container->setParameter('mailer.transport', 'sendmail');
As well as retrieving the parameter values directly from the container you
can use them in the config files. You can refer to parameters elsewhere by
surrounding them with percent (%) signs, e.g. %mailer.transport%.
One use for this is to inject the values into your services. This allows
you to configure different versions of services between applications or multiple
services based on the same class but configured differently within a single
application. You could inject the choice of mail transport into the Mailer
class directly. But declaring it as a parameter makes it easier to change
rather than being tied up and hidden with the service definition:
parameters:
mailer.transport: sendmail
services:
mailer:
class: Mailer
arguments: ['%mailer.transport%']
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services http://symfony.com/schema/dic/services/services-1.0.xsd">
<parameters>
<parameter key="mailer.transport">sendmail</parameter>
</parameters>
<services>
<service id="mailer" class="Mailer">
<argument>%mailer.transport%</argument>
</service>
</services>
</container>
use SymfonyComponentDependencyInjectionReference;
$container->setParameter('mailer.transport', 'sendmail');
$container
->register('mailer', 'Mailer')
->addArgument('%mailer.transport%');
警告
The values between parameter tags in XML configuration files are not
trimmed.
This means that the following configuration sample will have the value
n sendmailn:
<parameter key="mailer.transport">
sendmail
</parameter>
In some cases (for constants or class names), this could throw errors. In order to prevent this, you must always inline your parameters as follow:
<parameter key="mailer.transport">sendmail</parameter>
If you were using this elsewhere as well, then you would only need to change the parameter value in one place if needed.
注解
The percent sign inside a parameter or argument, as part of the string, must be escaped with another percent sign:
arguments: ["http://symfony.com/?foo=%%s&bar=%%d"]
<argument>http://symfony.com/?foo=%%s&bar=%%d</argument>
->addArgument('http://symfony.com/?foo=%%s&bar=%%d');
Parameters do not need to be flat strings, they can also contain array values.
For the XML format, you need to use the type="collection" attribute for
all parameters that are arrays.
parameters:
my_mailer.gateways:
- mail1
- mail2
- mail3
my_multilang.language_fallback:
en:
- en
- fr
fr:
- fr
- en
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services http://symfony.com/schema/dic/services/services-1.0.xsd">
<parameters>
<parameter key="my_mailer.gateways" type="collection">
<parameter>mail1</parameter>
<parameter>mail2</parameter>
<parameter>mail3</parameter>
</parameter>
<parameter key="my_multilang.language_fallback" type="collection">
<parameter key="en" type="collection">
<parameter>en</parameter>
<parameter>fr</parameter>
</parameter>
<parameter key="fr" type="collection">
<parameter>fr</parameter>
<parameter>en</parameter>
</parameter>
</parameter>
</parameters>
</container>
$container->setParameter('my_mailer.gateways', array('mail1', 'mail2', 'mail3'));
$container->setParameter('my_multilang.language_fallback', array(
'en' => array('en', 'fr'),
'fr' => array('fr', 'en'),
));
The container also has support for setting PHP constants as parameters. To
take advantage of this feature, map the name of your constant to a parameter
key, and define the type as constant.
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services http://symfony.com/schema/dic/services/services-1.0.xsd">
<parameters>
<parameter key="global.constant.value" type="constant">GLOBAL_CONSTANT</parameter>
<parameter key="my_class.constant.value" type="constant">My_Class::CONSTANT_NAME</parameter>
</parameters>
</container>
$container->setParameter('global.constant.value', GLOBAL_CONSTANT);
$container->setParameter('my_class.constant.value', My_Class::CONSTANT_NAME);
注解
This does not work for YAML configurations. If you’re using YAML, you can import an XML file to take advantage of this functionality:
imports:
- { resource: parameters.xml }
By default, true, false and null in XML are converted to the PHP
keywords (respectively true, false and null):
<parameters>
<parameter key="mailer.send_all_in_once">false</parameter>
</parameters>
<!-- after parsing
$container->getParameter('mailer.send_all_in_once'); // returns false
-->
To disable this behavior, use the string type:
<parameters>
<parameter key="mailer.some_parameter" type="string">true</parameter>
</parameters>
<!-- after parsing
$container->getParameter('mailer.some_parameter'); // returns "true"
-->
注解
This is not available for YAML and PHP, because they already have built-in support for the PHP keywords.